Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. MS28776-35 specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
outside grooved, straight face
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.
3.919in.
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
4.094in.
A measurement of the smallest dimension of the material,in distinction from length or width.
0.140in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the ring.
concentric
0.109in.
The chemical compound or mechanical mixture properties of which the item is fabricated.
copper alloy
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-6049 mil spec single material response
The document designator of the specification or standard which established the item of supply.
96906-MS28776 government standard
Answers.
1EA
Copper alloy
Concentric
0.140 inches
4.094 inches
3.919 inches
Schedule B number: 8412909005
nmfc 194120
Parts of linear acting hydraulic power engines and motors
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-01-248-8833 RING,WIPER
concentric ring style 0.140" material thickness 4.094" outside diameter 3.919" inside diameter
- NIIN
- 012488833
- NIIN Date
- 01/31/87
- Schedule B
- 8412909005
- Name Code
- 20256
- FIIG
- A08400
- QUP
- 1
- Historical Price
- $61.00 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Singapore
- - Malaysia
- - New Zealand
- - France
Availability for MS28776-35 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Gaskets, (machinery and parts),(less than 35 feet)
- NMFC (national motor freight code)
- 194120 WASHERS/GASKETS/PCKG DVCS NOI
- UFC (universal freight code)
- 95100
Similar by Design Other rings with similar characteristics
Nothing similar to this part number was found in our inventory
MS28776-35 / Ring,wiperWhat is the formal definition of this item?
A circular, single or multipiece, rigid, metallic or nonmetallic item having a centrally located hole with a sharp edge on the inside periphery. it is supplied in various cross-sectional shapes and is designed to be installed in a cylinder, shock strut, or similar device to remove excess oil, dirt, ice, and/or foreign material from a piston, ram, or sliding rod. excludes packing, preformed; ring, piston; and seal ring, metal.
