Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. CEC-401-212-01 specification
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.
0.814in.
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
1.078in.
A measurement of the smallest dimension of the material,in distinction from length or width.
0.290in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the ring.
concentric
The national stock number or the identification information of the end equipment for which the item is a part.
aircraft B-1B
The chemical compound or mechanical mixture properties of which the item is fabricated.
revonoc 18156
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.
aircraft hydraulic system
Answers.
1EA
Revonoc 18156
Concentric
0.290 inches
1.078 inches
0.814 inches
Schedule B number: 8412909005
nmfc 095190
Parts of linear acting hydraulic power engines and motors
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-01-187-8052 RING,WIPER
Used on aircraft b-1b. concentric ring style 0.290" material thickness 1.078" outside diameter 0.814" inside diameter
- NIIN
- 011878052
- NIIN Date
- 08/25/84
- Schedule B
- 8412909005
- Name Code
- 20256
- FIIG
- A08400
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $41.48 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
- - Department of The Air Force
- - U.s. Coast Guard
- - Brazil
- - Spain
- - Australia
- - Greece
Availability for CEC-401-212-01 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- 70.0
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 095190 HARDWARE, NOI
- UFC (universal freight code)
- 49790
Similar by Design Other rings with similar characteristics
Nothing similar to this part number was found in our inventory
CEC-401-212-01 / Ring,wiperWhat is the formal definition of this item?
A circular, single or multipiece, rigid, metallic or nonmetallic item having a centrally located hole with a sharp edge on the inside periphery. it is supplied in various cross-sectional shapes and is designed to be installed in a cylinder, shock strut, or similar device to remove excess oil, dirt, ice, and/or foreign material from a piston, ram, or sliding rod. excludes packing, preformed; ring, piston; and seal ring, metal.
