Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. A-78114-01-PIECE 10 specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
outside grooved, straight face
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.
1.373in.
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
1.684in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the ring.
concentric
0.104in.
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
for navy nuclear propulsion plant products only
The chemical compound or mechanical mixture properties of which the item is fabricated.
any acceptable
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.
as differentiated by free from mercury contanination
Answers.
1EA
Any acceptable
Concentric
1.684 inches
1.373 inches
Schedule B number: 8412909005
nmfc 197720
Parts of linear acting hydraulic power engines and motors
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-01-098-7329 RING,WIPER
for navy nuclear propulsion plant products only concentric ring style 1.684" outside diameter 1.373" inside diameter
- NIIN
- 010987329
- NIIN Date
- 08/07/80
- Schedule B
- 8412909005
- Name Code
- 20256
- FIIG
- A08400
- QUP
- 1
- Historical Price
- $14.55 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 959-15 | Cage 30781 |
Major End Users Countries and entities
- - Department of The Navy
Availability for A-78114-01-PIECE 10 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 85.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Vehicle parts, other than automobile
- NMFC (national motor freight code)
- 197720 WINDSHIELD WIPER ARMS BLADES/MTRS
- UFC (universal freight code)
- 96870
Similar by Design Other rings with similar characteristics
Nothing similar to this part number was found in our inventory
A-78114-01-PIECE 10 / Ring,wiperWhat is the formal definition of this item?
A circular, single or multipiece, rigid, metallic or nonmetallic item having a centrally located hole with a sharp edge on the inside periphery. it is supplied in various cross-sectional shapes and is designed to be installed in a cylinder, shock strut, or similar device to remove excess oil, dirt, ice, and/or foreign material from a piston, ram, or sliding rod. excludes packing, preformed; ring, piston; and seal ring, metal.
