Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 12576074 specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
counterbored straight face
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.
2.997in.
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
3.372in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the ring.
concentric
0.119in.
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
otemperature:-65 deg f to 250 deg f; must completely remove accumulationsof dirt; must perform for 10, 000 reciprocating cycles with rod displacements of 36in. and rod speeds up to 50 ft/sec in downstream direction
The chemical compound or mechanical mixture properties of which the item is fabricated.
plastic polyurethane
Answers.
Plastic polyurethane
Concentric
3.372 inches
2.997 inches
Schedule B number: 8412909005
nmfc 156600
Parts of linear acting hydraulic power engines and motors
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-01-294-6373 RING,WIPER
otemperature:-65 deg f to 250 deg f; must completely remove accumulationsof dirt; must perform for 10, 000 reciprocating cycles with rod displacements of 36" concentric ring style 3.372" outside diameter 2.997" inside diameter
- NIIN
- 012946373
- NIIN Date
- 02/18/89
- Schedule B
- 8412909005
- Name Code
- 20256
- FIIG
- A08400
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | SH-959-29 | Cage 30781 |
Major End Users Countries and entities
- - Spain
- - Turkey
Availability for 12576074 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Food sercive equipment, (mkt), field ranges, vacuum cans, beverage containers, etc
- NMFC (national motor freight code)
- 156600 PLASTIC/RUBBER ARTICLE VIZ:
- UFC (universal freight code)
- 77670
Similar by Design Other rings with similar characteristics
Nothing similar to this part number was found in our inventory
12576074 / Ring,wiperWhat is the formal definition of this item?
A circular, single or multipiece, rigid, metallic or nonmetallic item having a centrally located hole with a sharp edge on the inside periphery. it is supplied in various cross-sectional shapes and is designed to be installed in a cylinder, shock strut, or similar device to remove excess oil, dirt, ice, and/or foreign material from a piston, ram, or sliding rod. excludes packing, preformed; ring, piston; and seal ring, metal.
