Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. MIL-G-16265-GRAPHITE specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
metal winding w/ soft filler and outer ring
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.
875.0 deg fahrenheit
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
10.312in. and 10.375in.
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.
8.859in. and 8.891in.
A measurement taken across the bearing surface,in distinction from thickness.
0.672in.
11.812in.
A measurement of the smallest dimension of a cross section,in distinction from length or width.
0.170in. and 0.180in.
0.119in. and 0.131in.
The maximum pressure at which an item is rated to operate.
600.0 pounds per square inch
Indicates the type of product that meets or exceeds the government guidelines for environmentally preferred characteristics.
asbestos alternative products
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
contains NON-Absbestos materials
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
circular
Answers.
1EA
Circular
10.312 inches minimum and 10.375 inches maximum
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-01-517-1764 GASKET,SPIRAL WOUND
circular contains non-absbestos materials 10.312" outside diameter
- NIIN
- 015171764
- NIIN Date
- 01/31/04
- Schedule B
- Name Code
- 37840
- FIIG
- A032A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $152.53 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- Asbestos alternative products
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
- - Spain
- - Greece
Availability for MIL-G-16265-GRAPHITE A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Gaskets, (machinery and parts),(less than 35 feet)
- NMFC (national motor freight code)
- 194120 WASHERS/GASKETS/PCKG DVCS NOI
- UFC (universal freight code)
- 95100
Similar by Design Other gaskets with similar characteristics
Nothing similar to this part number was found in our inventory
MIL-G-16265-GRAPHITE / Gasket,spiral woundWhat is the formal definition of this item?
A circular or moderately noncircular shaped item with an aperture. it is constructed of spring-like metal strips, preformed into a vee shape, laminated with a soft filler. it is designed to seal between two nondeforming surfaces. it may have an inner and/or outer, solid or spiral wound compression ring(s).
