Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 6392605-1 specification
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.
0.121in. and 0.129in.
A measurement of the smallest dimension of an item,in distinction from length or width.
0.073in. and 0.081in. ⁓3/32"
The national stock number or the identification information of the end equipment for which the item is a part.
asds
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 6061
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
astm B221 assn std single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
anodize
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-C-5541 mil spec single treatment response
Answers.
Aluminum alloy 6061
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-01-518-8179 DISK,SOLID,PLAIN
Used on ASDS. anodize surface treated
- NIIN
- 015188179
- NIIN Date
- 03/24/04
- Schedule B
- Name Code
- 16584
- FIIG
- A539R0
- QUP
- Historical Price
- $3,550.63 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
Availability for 6392605-1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Arms/weapons (all types including inert component parts). when a 2" is indicated in the first position, then the special handlin
- Commodity (for shipments via water)
- Motors and parts, (machinery and parts),(less than 35 feet)
- NMFC (national motor freight code)
- 095190 HARDWARE, NOI
- UFC (universal freight code)
- 49790
Similar by Design Other disks with similar characteristics
Nothing similar to this part number was found in our inventory
6392605-1 / Disk,solid,plainWhat is the formal definition of this item?
A circular item with two parallel bearing surfaces without hole(s) or groove(s). it has an outside diameter greater than its length, and may be fabric reinforced. do not use if a more specific item name applies. for items primarily designed to rupture at a predetermined pressure, see disk, rupturable. for items made of felt, see felt, mechanical, preformed. for metallic or plastic items with a laminated cross section, see shim. excludes diaphragm, valve, flat; diaphragm, valve, special shaped; disk, valve, nonmetallic; filtering disk fluid; and insulator, disk.
