Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. FTSRC301-.380SA specification
The distance measured in a straight line from the bottom to the top of an item.
0.292in. and 0.306in.
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.
0.1705in. and 0.1715in.
The national stock number or the identification information of the end equipment for which the item is a part.
C-17A
The structural characteristic of the item.
ONE-Piece
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
retainer, seal nut, cres, rivetless, class 1 fit
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
top flange has 2 flats opposite one another, 2 steps below top flange; 125 microinch finish all surfaces
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 630
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5643 cond H1025 fed spec single material response
Answers.
Steel comp 630
Schedule B number: 3926904500
nmfc 194120
Gaskets,washers & other seals
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-01-629-3414 RETAINER,SEAL
Used on C-17A. top flange has 2 flats opposite one another, 2 steps below top flange; 125 microinch finish all surfaces retainer, seal nut, cres, rivetless, class 1 fit
- NIIN
- 016293414
- NIIN Date
- 06/25/14
- Schedule B
- 3926904500
- Name Code
- 50336
- FIIG
- A032A0
- DEMIL / ITAR
- Uncontrolled item (Code )
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- --
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 3D0336-3-380 | Cage 88277 |
Major End Users Countries and entities
- - Department of The Air Force
Availability for FTSRC301-.380SA A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 194120 WASHERS/GASKETS/PCKG DVCS NOI
- UFC (universal freight code)
- 95100
Similar by Design Other retainers with similar characteristics
Nothing similar to this part number was found in our inventory
FTSRC301-.380SA / Retainer,sealWhat is the formal definition of this item?
An item of various shapes and cross sections, usually flanged and designed to fit over a rod, shaft, or the like, for the purpose of encasing and posititioning a seal, plain encased or a seal, plain. the flange is usually drilled for stud or bolt mounting. item does not include the seal. excludes retainer, packing.
