Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 2-141-124-05 specification
The length of a straight line which passes through the center of a bolt circle,and terminates at the circumference.
6.430in.
A measurement of the smallest dimension of a flange,in distinction from length or width.
0.188in. and 0.192in.
The distance measured in a straight line from the bottom to the top of an item.
1.284in. and 1.286in.
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.
3.500in.
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.
5.910in. and 5.920in.
The number of bolt holes provided on the item.
22
The national stock number or the identification information of the end equipment for which the item is a part.
T-55Engine
The length of a straight line which passes through the center of the mounting flange,and terminates at the circumference.
6.810in. and 6.820in.
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel retainer
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
2-141-124-05, 91547 mfr ref single material response retainer
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.
engine, gas turbine, acft
Answers.
1EA
Steel retainer
22
Schedule B number: 3926904500
nmfc 194160
Gaskets,washers & other seals
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-00-150-1924 RETAINER,SEAL
Used on t-55engine. 22 bolt hole quantity
- NIIN
- 001501924
- NIIN Date
- 10/01/71
- Schedule B
- 3926904500
- Name Code
- 50336
- FIIG
- A032A0
- Item Weight
- 1.000lbs
- Item Dimensions
- 80 X 80 X 40
- QUP
- 1
- Historical Price
- $955.00 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | V2-141-124-05 | Cage 1N8S8 |
Major End Users Countries and entities
- - Department of The Navy
- - Department of The Army
- - Spain
- - Singapore
- - Malaysia
- - Australia
- - Republic of Korea
- - United Kingdom
- - Greece
Availability for 2-141-124-05 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- 50.0
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Gaskets, (machinery and parts),(less than 35 feet)
- NMFC (national motor freight code)
- 194160 WASHER OR GASKETS, IRON OR STEEL,
- UFC (universal freight code)
- 55210
Similar by Design Other retainers with similar characteristics
Nothing similar to this part number was found in our inventory
2-141-124-05 / Retainer,sealWhat is the formal definition of this item?
An item of various shapes and cross sections, usually flanged and designed to fit over a rod, shaft, or the like, for the purpose of encasing and posititioning a seal, plain encased or a seal, plain. the flange is usually drilled for stud or bolt mounting. item does not include the seal. excludes retainer, packing.
