Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 167-7066800-32 specification
The distance measured in a straight line from the bottom to the top of an item.
0.512in. and 0.515in.
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.
29.867in. and 29.872in.
The national stock number or the identification information of the end equipment for which the item is a part.
nssn class submarine 30 inch unseating lower hatch
The length of a straight line which passes through the center of the mounting flange,and terminates at the circumference.
32.220in. and 32.225in.
31.771in. and 31.776in.
The structural characteristic of the item.
ONE-Piece
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
retainer plate
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
57 - 0.344" equally spaced bolt holes each with 0.692" x 82 degree countersink; 4 - 0.375 - 16 UNC-28 jack screw holes
The chemical compound or mechanical mixture properties of which the item is fabricated.
nickel alloy
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-N-281 cl a form 6 rolled fed spec single material response
Answers.
Nickel alloy
Schedule B number: 3926904500
nmfc 194130
Gaskets,washers & other seals
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-01-539-7328 RETAINER,SEAL
Used on nssn class submarine 30 inch unseating lower hatch. 57 - 0.344" equally spaced bolt holes each with 0.692" x 82 degree countersink; 4 - 0.375 - 16 unc-28 jack screw holes retainer plate
- NIIN
- 015397328
- NIIN Date
- 05/01/06
- Schedule B
- 3926904500
- Name Code
- 50336
- FIIG
- A032A0
- QUP
- Historical Price
- $19,140.38 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | H547-1803-32 | Cage 96169 |
Major End Users Countries and entities
- - Department of The Navy
Availability for 167-7066800-32 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Engineer supplies, other than those listed under code b.
- Commodity (for shipments via water)
- Gaskets, (machinery and parts),(less than 35 feet)
- NMFC (national motor freight code)
- 194130 WASHERS/GASKETS/MAINT I/C ENG
- UFC (universal freight code)
- 95100
Similar by Design Other retainers with similar characteristics
Nothing similar to this part number was found in our inventory
167-7066800-32 / Retainer,sealWhat is the formal definition of this item?
An item of various shapes and cross sections, usually flanged and designed to fit over a rod, shaft, or the like, for the purpose of encasing and posititioning a seal, plain encased or a seal, plain. the flange is usually drilled for stud or bolt mounting. item does not include the seal. excludes retainer, packing.
