Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 114D1064-1 specification
The length of a straight line which passes through the center of a bolt circle,and terminates at the circumference.
9.740in. and 9.760in.
A measurement of the smallest dimension of a flange,in distinction from length or width.
0.180in. and 0.220in.
The distance measured in a straight line from the bottom to the top of an item.
1.510in. and 1.514in.
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.
7.240in. and 7.260in.
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.
8.817in. and 8.818in.
The number of bolt holes provided on the item.
10
The length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.
0.281in. and 0.288in.
The length of a straight line which passes through the center of the mounting flange,and terminates at the circumference.
10.496in. and 10.498in.
7.498in. and 7.502in.
0.453in. and 0.457in.
0.520 mils and 0.524 centimeters
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
three holes 0.499 in. min, 0.508 in. max dia located 37.5, 155 and 205 deg all diameters on common centerline concentric w/each other within 0.010 tir
The chemical compound or mechanical mixture properties of which the item is fabricated.
magnesium alloy AZ91C
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-M-56, hta fed spec single material response
Answers.
Magnesium alloy az91c
10
Schedule B number: 3926904500
nmfc 114820
Gaskets,washers & other seals
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-00-830-4308 RETAINER,SEAL
three holes 0.499 in. min, 0.508 in. max dia located 37.5, 155 10 bolt hole quantity
- NIIN
- 008304308
- NIIN Date
- 01/01/62
- Schedule B
- 3926904500
- Name Code
- 50336
- FIIG
- A032A0
- DEMIL / ITAR
- USML/ITAR controlled item (Code: B)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Spain
Availability for 114D1064-1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- 77.5
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Bearings
- NMFC (national motor freight code)
- 114820 BEARINGS/BUSHINGS NOI BALL/ROLLER
- UFC (universal freight code)
- 58860
Similar by Design Other retainers with similar characteristics
Nothing similar to this part number was found in our inventory
114D1064-1 / Retainer,sealWhat is the formal definition of this item?
An item of various shapes and cross sections, usually flanged and designed to fit over a rod, shaft, or the like, for the purpose of encasing and posititioning a seal, plain encased or a seal, plain. the flange is usually drilled for stud or bolt mounting. item does not include the seal. excludes retainer, packing.
