Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 44121-7173 STYLE 5022AFP specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
angle
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.
450.0 deg fahrenheit
The number of joints in the item.
1
A measurement from the bottom to the top of a cross section,in distinction from depth.
0.470in. and 0.530in.
The length of a straight line which passes through the center of the center hole,and terminates at the circumference.
0.590in. and 0.650in.
0.910in. and 0.970in.
The means by which the item is lubricated.
impregnated
The national stock number or the identification information of the end equipment for which the item is a part.
used on 93016H4100; end item is fuel pump, 600 gpm (FU604G) 4930-01-392-7579
Indicates the type of joint/s/ on the item.
SCARF-Peripheral
Indicates the type of cut provided.
diagonal
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
packing ring
The substances and/or materials contained in the item that have been identified as hazardous or environmentally damaging by the environmental protection agency or other authorized government agency.
oil and plastic
The chemical compound or mechanical mixture properties with which the item is lubricated.
oil
The chemical compound or mechanical mixture properties of which the item is fabricated.
plastic polyurethane
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.
intended for dynamic service and shipboard fluids except superheated steam or other service resulting in packing temperatures of over 450 degrees fahrenheit oxygen, molten alkaline metals, or fluorochemicals; pressures should not exceed 150 pounds per square inch at the packing, and rod or shaft speed should not exceed 1, 5000 feet per minute
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-P-24396 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
The document designator of the specification or standard which established the item of supply.
81349-MIL-P-24396 government specification
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.
a type
Answers.
1EA
Plastic polyurethane
Schedule B number: 3926904500
nmfc 194050
Gaskets,washers & other seals
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-01-506-9666 PACKING,PREFORMED
Used on 93016h4100; end item is fuel pump, 600 gpm (fu604g) 4930-01-392-7579. packing ring 0.590" center hole diameter
- NIIN
- 015069666
- NIIN Date
- 04/15/03
- Schedule B
- 3926904500
- Name Code
- 04521
- FIIG
- A032A0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $879.30 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 93016H4101 | Cage 01365 |
| 2. | T793-0062-012-7500 | Cage 99189 |
Major End Users Countries and entities
- - Department of The Navy
- - U.s. Marine Corps
Availability for 44121-7173 STYLE 5022AFP A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Gaskets, (machinery and parts),(less than 35 feet)
- NMFC (national motor freight code)
- 194050 GASKETS/RINGS PLUMBING FIXTURES
- UFC (universal freight code)
- 78100
Similar by Design Other packings with similar characteristics
Nothing similar to this part number was found in our inventory
44121-7173 STYLE 5022AFP / Packing,preformedWhat is the formal definition of this item?
A circular shaped item with an aperture manufactured to predetermined dimensions and designed for use as a seal in stuffing boxes, packing nuts, and the like. it may be (1) any nonmetallic molded or formed ring (except solid (without joint) rings having a square or rectangular cross section); or (2) any shredded metal or metal foil type metallic or semimetallic rings. excludes felt items but includes multimaterial items in which one of the materials is felt. for solid (without joints) nonmetallic items with a square or rectangular cross section, see washer (as modified) and gasket. for rubber items specifically designed for weather-proofing doors, windows, chests, and the like see seal, nonmetallic angle; seal, nonmetallic channel; and seal, nonmetallic, special shaped section. for circular (with aperature) nonmetallic items with a solid round cross-section see o-ring. excludes cup, compression; gasket; washer (as modified); and felt, mechanical, preformed.
