Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. LP-H-56211-02 specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
dual lip
The length of a straight line which passes through the center of the accommodation for the shaft,and terminates at the circumference.
379.0 mm
The national stock number or the identification information of the end equipment for which the item is a part.
rudder support system
The structural characteristic of the item.
ONE-Piece
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
grease seal, upper bearing, lower
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
fiber material is aramid which is a flame resistant fiber
The chemical compound or mechanical mixture properties of which the item is fabricated.
fiber and rubber BUTADIENE-Acrylonitrile class nbr
Answers.
Fiber and rubber butadiene-acrylonitrile class nbr
Schedule B number: 3926904500
nmfc 194090
Gaskets,washers & other seals
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-01-529-1577 SEAL,PLAIN
Used on rudder support system. fiber material is aramid which is a flame resistant fiber grease seal, upper bearing, lower
- NIIN
- 015291577
- NIIN Date
- 04/06/05
- Schedule B
- 3926904500
- Name Code
- 04250
- FIIG
- A032A0
- QUP
- Historical Price
- $43.45 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 22-01-02 IT.13 DET 8-F | Cage 1CC97 |
| 2. | 161-7317963 IT.13 DET 8-F | Cage 53711 |
Major End Users Countries and entities
- - Department of The Navy
Availability for LP-H-56211-02 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 60.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Gaskets, (machinery and parts),(less than 35 feet)
- NMFC (national motor freight code)
- 194090 WASHERS/SEALS
- UFC (universal freight code)
- 95100
Similar by Design Other seals with similar characteristics
Nothing similar to this part number was found in our inventory
LP-H-56211-02 / Seal,plainWhat is the formal definition of this item?
A pliable rubber or composition ring-shaped element, split or jointless (solid) not encased in a metal shell, but having a spring, spreader and/or molded-in reinforcement. it is designed to be pressmounted between fixed and movable or moving parts to form a tight and effective seal.
