Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 25624317 specification
The length of a straight line which passes through the center of the accommodation for the shaft,and terminates at the circumference.
2.750in.
A measurement taken between the flat surfaces /front and back/ of the seal,in distinction from thickness.
0.500in.
The national stock number or the identification information of the end equipment for which the item is a part.
mrap - unique nsn - used on 2 mrap variants
The style designation indicating the configuration that most nearly corresponds to the appearance of the case.
square
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
seal, plain, encased 2.750 id, 3.5468 od x .500
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
used on intermediate differntial carrier assembly; tm 9-2320-327-24P figure 144 item 9
Answers.
1EA
Schedule B number: 8710000090
nmfc 194120
Parts of armored fighting vehicles,motorized, whether or not fitted with weapons
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-01-563-4724 SEAL,PLAIN ENCASED
Used on mrap - unique nsn - 2 mrap variants. used on intermediate differntial carrier assembly; tm 9-2320-327-24p figure 144 item 9 seal, plain, encased 2.750 id, 3.5468 od x .500
- NIIN
- 015634724
- NIIN Date
- 05/12/08
- Schedule B
- 8710000090
- Name Code
- 04214
- FIIG
- A032A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $42.38 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 88AX 456 | Cage 89619 |
| 2. | 88AX456 | Cage 89619 |
Major End Users Countries and entities
- - Department of The Army
- - U.s. Marine Corps
- - Department of The Navy
Availability for 25624317 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 194120 WASHERS/GASKETS/PCKG DVCS NOI
- UFC (universal freight code)
- 95100
Similar by Design Other seals with similar characteristics
Nothing similar to this part number was found in our inventory
25624317 / Seal,plain encasedWhat is the formal definition of this item?
A pliable rubber, felt, leather, or composition ring-shaped element, split or solid; with or without spring or spreader, having a metal shell on all or a portion of at least two of the outer surfaces. it may be designed to be either bolt mounted or pressmounted between fixed and moveable parts to form a tight and effective seal by the pressure of the spring or spreader or the resiliency inherent in the element material. excludes packing with retainer.
