Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. C12E1B-221N-01 specification
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.
1.550in.
A measurement of the smallest dimension of the retainer,in distinction from length or width.
0.205in.
The length of a straight line which passes through the center of the packing ring in cross section,and terminates at the circumference.
0.139in.
The length of a straight line which passes through the center of a retainer,and terminates at the inside circumference.
1.430in.
The length of a straight line which passes through the center of the packing,and terminates at the inside circumference.
1.421in.
The structural characteristic of the item.
TWO-Piece
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
letter n in part number denotes 2 notches on each face of packing retainer 180.0 degrees apart
The chemical compound or mechanical mixture properties of which the item is fabricated.
plastic polytetrafluoroethylene retainer
The chemical compound or mechanical mixture properties of which the item is fabricated.
rubber BUTADIENE-Acrylonitrile class nbr packing
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
18156-1 fscm 07060 mfr ref single material response retainer
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-P-25732 mil spec single material response packing
Answers.
1EA
Rubber butadiene-acrylonitrile class nbr packing
Plastic polytetrafluoroethylene retainer
Schedule B number: 3926904500
nmfc 194120
Gaskets,washers & other seals
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-01-124-4475 PACKING WITH RETAINER
letter n in part number denotes 2 notches on each face of packing retainer 180.0 degrees apart
- NIIN
- 011244475
- NIIN Date
- 01/05/82
- Schedule B
- 3926904500
- Name Code
- 05680
- FIIG
- A032A0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $14.30 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
Availability for C12E1B-221N-01 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Food sercive equipment, (mkt), field ranges, vacuum cans, beverage containers, etc
- NMFC (national motor freight code)
- 194120 WASHERS/GASKETS/PCKG DVCS NOI
- UFC (universal freight code)
- 95100
Similar by Design Other packing with retainers with similar characteristics
Nothing similar to this part number was found in our inventory
C12E1B-221N-01 / Packing with retainerWhat is the formal definition of this item?
An item composed of a compressible nonmetallic ring which may be loosely fitted into a noncompressible retaining ring, or may be of one piece construction with the compressible ring molded and/or mechanically connected to the retainer. it is specifically designed to form a fluid tight seal when compressed by a packing nut, gland, etc., between fixed surfaces and a cylindrical item passing through it. excludes seal, plain, encased.
