Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. E87890-21 specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
v
The means used to attach the item.
round hole
The number of attachment features included.
4
The length of a straight line which passes through the center of an attachment hole,and terminates at the circumference.
0.190in.
A measurement from the bottom to the top of a cross section,in distinction from depth.
0.500in.
The length of a straight line which passes through the center of the center hole,and terminates at the circumference.
13.753in. and 13.755in.
14.745in. and 14.747in.
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
attachment holes tapped with 10-32Nf thd 0.125 in. deep
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.
arresting gear, aircraft landing
Answers.
Schedule B number: 3926904500
nmfc 095190
Gaskets,washers & other seals
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-00-641-7602 RETAINER,PACKING
attachment holes tapped with 10-32nf thd 0.125 in. deep 13.753" center hole diameter
- NIIN
- 006417602
- NIIN Date
- 01/01/63
- Schedule B
- 3926904500
- Name Code
- 13706
- FIIG
- A032A0
- QUP
- Historical Price
- $74.78 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
Availability for E87890-21 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- 77.5
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 095190 HARDWARE, NOI
- UFC (universal freight code)
- 49790
Similar by Design Other retainers with similar characteristics
Nothing similar to this part number was found in our inventory
E87890-21 / Retainer,packingWhat is the formal definition of this item?
An item designed to fit over a packing gland by mating with a surface of a second part which together will retain into a narrow groove or confined space the packing, preformed or o-ring, or an item designed to fit over a rod or shaft, to mate with a stuffing box to confine packing material. it may function as a static or dynamic seal retainer with the packing located on, around, or in the centerline direction of the rod or shaft axis. it may have holes or joints for mounting, be threaded or unthreaded. see also packing nut and packing nut, stuffing tube.
