16379-5

163795 Packing Retainer

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. 16379-5 specification

Cross-sectional Height
A measurement from the bottom to the top of a cross section,in distinction from depth.

0.025in. and 0.029in.

Distance Between Ends
The distance between the ends of the item.

0.032in. and 0.064in.

Center Hole Diameter
The length of a straight line which passes through the center of the center hole,and terminates at the circumference.

0.262in.

Peripheral Diameter

0.370in. and 0.374in.

Joint Type
Indicates the type of joint/s/ on the item.

SCARF-Butt one side

Angle

30.000 degrees

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

plastic polytetrafluoroethylene

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 3651 assn std single material response

Fsc Application Data
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.

pressure switch

Answers.

What material is the packing retainer made of ?

Plastic polytetrafluoroethylene

What is the NSN for 16379-5?

5330-00-684-5488

How is this classified for shipping?

Schedule B number: 3926904500
nmfc 194120
Gaskets,washers & other seals

What's the federal classification of 16379-5?

FSC 5330 ⁓ Packing and gasket materials

Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.

Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.

NSN 5330-00-684-5488 RETAINER,PACKING

0.262" center hole diameter

NIIN
006845488
NIIN Date
01/01/63
Schedule B
3926904500 
Name Code
13706
FIIG
A032A0
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
Metal content unknown
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Major End Users Countries and entities

  • - Brazil 

Availability for 16379-5 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
Rating variable 
LCL (less than a car load rating)
77.5
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing 
Commodity (for shipments via water)
Gaskets, (machinery and parts),(less than 35 feet) 
NMFC (national motor freight code)
194120 WASHERS/GASKETS/PCKG DVCS NOI 
UFC (universal freight code)
95100 

Similar by Design Other retainers with similar characteristics

Nothing similar to this part number was found in our inventory

16379-5 / Retainer,packingWhat is the formal definition of this item?

An item designed to fit over a packing gland by mating with a surface of a second part which together will retain into a narrow groove or confined space the packing, preformed or o-ring, or an item designed to fit over a rod or shaft, to mate with a stuffing box to confine packing material. it may function as a static or dynamic seal retainer with the packing located on, around, or in the centerline direction of the rod or shaft axis. it may have holes or joints for mounting, be threaded or unthreaded. see also packing nut and packing nut, stuffing tube.