1012A

1012A Packing Retainer

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. 1012A specification

Recess Diameter
The length of a straight line which passes through the center of the recess,and terminates at the circumference.

0.875in.

Cross Section Inside Diameter
The length of a straight line which passes through the center of a cross section,and terminates at the inside circumference.

9.250in.

Cross Section Outside Diameter
The length of a straight line which passes through the center of a cross section,and terminates at the outside circumference.

11.750in.

Cross-sectional Thickness
A measurement of the smallest dimension of a cross section,in distinction from length or width.

2.0626in.

Outer Groove Width

1.062in.

Lip Inside Diameter

6.303in. and 6.308in.

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

iron

Answers.

What quantity is this sold in?

1EA

What material is the packing retainer made of ?

Iron

What is the NSN for 1012A?

5330-00-958-8535

How is this classified for shipping?

Schedule B number: 3926904500
nmfc 194160
Gaskets,washers & other seals

What's the federal classification of 1012A?

FSC 5330 ⁓ Packing and gasket materials

Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.

Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.

NSN 5330-00-958-8535 RETAINER,PACKING

NIIN
009588535
NIIN Date
05/18/66
Schedule B
3926904500 
Name Code
13706
FIIG
A032A0
Item Weight
0.000lbs
Item Dimensions
--
QUP
Historical Price
$337.00 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
Metal content unknown
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Major End Users Countries and entities

  • - Department of The Army 

Availability for 1012A A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
50.0 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing 
Commodity (for shipments via water)
Gaskets, (machinery and parts),(less than 35 feet) 
NMFC (national motor freight code)
194160 WASHER OR GASKETS, IRON OR STEEL, 
UFC (universal freight code)
55210 

Similar by Design Other retainers with similar characteristics

Nothing similar to this part number was found in our inventory

1012A / Retainer,packingWhat is the formal definition of this item?

An item designed to fit over a packing gland by mating with a surface of a second part which together will retain into a narrow groove or confined space the packing, preformed or o-ring, or an item designed to fit over a rod or shaft, to mate with a stuffing box to confine packing material. it may function as a static or dynamic seal retainer with the packing located on, around, or in the centerline direction of the rod or shaft axis. it may have holes or joints for mounting, be threaded or unthreaded. see also packing nut and packing nut, stuffing tube.