Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 21I6055 specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
square/rectangular bottom ring
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
square/rectangular top ring
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
tee intermediate ring
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.
0.438in.
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.
0.688in.
The number of rings between the top and bottom rings.
1
Indicates the type of joint/s/ on the item.
SCARF-Peripheral top ring
Indicates the type of joint/s/ on the item.
SCARF-Peripheral bottom ring
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.
zzzy
A measurement from the bottom to the top of an object,in distinction from depth.
0.135in. and 0.143in.
The chemical compound or mechanical mixture properties of which the item is fabricated.
disulfide molybdenum and plastic polyamide top ring
The chemical compound or mechanical mixture properties of which the item is fabricated.
disulfide molybdenum and plastic polyamide bottom ring
The chemical compound or mechanical mixture properties of which the item is fabricated.
rubber BUTADIENE-Acrylonitrile class nbr intermediate ring
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
4115 fscm 30781 mfr ref single material response intermediate ring
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
B001 fscm 30781 mfr ref all material responses bottom ring
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
B001 fscm 30781 mfr ref all material responses top ring
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.
special quality control testing
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-P-23199 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.
as differentiated by material which must conform to ships parts control center special quality control provisions and certified free from mercury contamination
Answers.
1AY
Rubber butadiene-acrylonitrile class nbr intermediate ring
Disulfide molybdenum and plastic polyamide bottom ring
Disulfide molybdenum and plastic polyamide top ring
0.438 inches
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-01-214-7925 PACKING ASSEMBLY
0.438" inside diameter
- NIIN
- 012147925
- NIIN Date
- 08/15/85
- Schedule B
- Name Code
- 07961
- FIIG
- A032A0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $92.75 AY
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | TR-005 | Cage 30781 |
| 2. | 20353PC30 | Cage 16658 |
| 3. | LL-HX3-8972 | Cage 14153 |
Major End Users Countries and entities
- - Department of The Navy
- - Turkey
Availability for 21I6055 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Food sercive equipment, (mkt), field ranges, vacuum cans, beverage containers, etc
- NMFC (national motor freight code)
- 194120 WASHERS/GASKETS/PCKG DVCS NOI
- UFC (universal freight code)
- 95100
Similar by Design Other packing assemblys with similar characteristics
Nothing similar to this part number was found in our inventory
21I6055 / Packing assemblyWhat is the formal definition of this item?
Any combination of items manufactured from packing material to predetermined dimensions, or any combination of nonmetallic molded or formed shapes (other than solid rubber or synthetic rubber rings having a square or rectangular cross section) specifically designed and manufactured for use as a seal. the assembly may include metal lantern rings, metal separators, and/or end or adapter rings.
