Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. F181649 specification
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
264.000in. ⁓264-1/64"
A measurement from the bottom to the top of a cross section,in distinction from depth.
0.0938in.
A measurement of the cross section taken at right angles to the length,in distinction from thickness.
1.000in.
The national stock number or the identification information of the end equipment for which the item is a part.
door assembly, lcs hangar
The structural characteristic of the item.
ONE-Piece
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
gasket, silicone rubber
The chemical compound or mechanical mixture properties of which the item is fabricated.
rubber silicone class q
Answers.
Rubber silicone class q
Schedule B number: 3926904500
nmfc 194090
Gaskets,washers & other seals
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-01-632-7921 SEAL,NONMETALLIC STRIP
Used on door assembly, lcs hangar. gasket, silicone rubber 264.000" overall length
- NIIN
- 016327921
- NIIN Date
- 10/29/14
- Schedule B
- 3926904500
- Name Code
- 36874
- FIIG
- A032A0
- Item Weight
- 0.000lbs
- Item Dimensions
- DEMIL / ITAR
- Uncontrolled item (Code )
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- --
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | F165383 REV D ITEM 32 | Cage 34712 |
Major End Users Countries and entities
- - Department of The Navy
Availability for F181649 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 60.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Fabricated nonmetallic materials
- NMFC (national motor freight code)
- 194090 WASHERS/SEALS
- UFC (universal freight code)
- 95100
Similar by Design Other seals with similar characteristics
Nothing similar to this part number was found in our inventory
F181649 / Seal,nonmetallic stripWhat is the formal definition of this item?
An item fabricated from nonmetallic material designed to be used where there is no relative motion between joined parts. items having a square or rectangular cross section must be a single piece whose ends may have been secured together to form a specific shape. it may be formed to a specific shape, except round, with or without joints. it may have fabric, cord or metal reinforcement. except for molded corners, end cuts, and mounting facilities such as holes, slots, press-fit buttons, or the like, the item must be of one continuous cross section. for straight items with square end cuts and without mounting holes, slots or press-fit buttons see rubber strip. for items with round cross sections see seal, nonmetallic round section. excludes gasket and packing, preformed.
