Serving our customers with quality and safety first.
rectangular
29.000in. ⁓29-1/64"
0.032in.
0.500in.
seal cover
ONE-Piece
40.0 shore durometer a
nssn class submarine, contents indicator assy
four bolt holes 0.220 dia; center to center distance between bolt holes along width 0.280; center to center distance betwen bolt holes along length 5.650; center to center distance between bolt holes 5.900
rubber chloroprene class cr
MIL-R-6855 cl 2, ty a, gr 40 mil spec single material response
strip
1EA
Strip
Rubber chloroprene class cr
Schedule B number: 3926904500
nmfc 194120
Gaskets,washers & other seals
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
Used on seal cover. strip four bolt holes 0.220 dia; center to center distance between bolt holes along width 0.280; center to center distance betwen bolt holes along length 5.650; center to center distance between bolt holes 5.900 nssn class submarine, contents indicator assy 29.000" overall length
1. | H791-2701-32 | Cage 96169 |
Nothing similar to this part number was found in our inventory
An item fabricated from nonmetallic material designed to be used where there is no relative motion between joined parts. items having a square or rectangular cross section must be a single piece whose ends may have been secured together to form a specific shape. it may be formed to a specific shape, except round, with or without joints. it may have fabric, cord or metal reinforcement. except for molded corners, end cuts, and mounting facilities such as holes, slots, press-fit buttons, or the like, the item must be of one continuous cross section. for straight items with square end cuts and without mounting holes, slots or press-fit buttons see rubber strip. for items with round cross sections see seal, nonmetallic round section. excludes gasket and packing, preformed.