Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 168063PC8 specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
w or w/o radius delta
The process used in manufacturing the item.
solid
A measurement of the line segment extending from the center of a circle or sphere to the curve of an inside corner.
0.500in.
0.500in.
A measurement taken at right angles to the length of an aperture,in distinction from thickness.
4.700in.
A measurement of the longest dimension of an aperture,in distinction from width.
10.300in.
A measurement from the bottom to the top of a cross section,in distinction from depth.
0.250in.
A measurement of the cross section taken at right angles to the length,in distinction from thickness.
0.250in.
0.094in.
The structural characteristic of the item.
solid
The chemical compound or mechanical mixture properties of which the item is fabricated.
rubber synthetic
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
d shape
Answers.
D shape
Rubber synthetic
Schedule B number: 3926904500
nmfc 194120
Gaskets,washers & other seals
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-00-381-4005 SEAL,NONMETALLIC STRIP
d shape
- NIIN
- 003814005
- NIIN Date
- 01/01/63
- Schedule B
- 3926904500
- Name Code
- 36874
- FIIG
- A032A0
- QUP
- Historical Price
- $151.15 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
- - Spain
- - Greece
- - Turkey
Availability for 168063PC8 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Gaskets, (machinery and parts),(less than 35 feet)
- NMFC (national motor freight code)
- 194120 WASHERS/GASKETS/PCKG DVCS NOI
- UFC (universal freight code)
- 95100
Similar by Design Other seals with similar characteristics
Nothing similar to this part number was found in our inventory
168063PC8 / Seal,nonmetallic stripWhat is the formal definition of this item?
An item fabricated from nonmetallic material designed to be used where there is no relative motion between joined parts. items having a square or rectangular cross section must be a single piece whose ends may have been secured together to form a specific shape. it may be formed to a specific shape, except round, with or without joints. it may have fabric, cord or metal reinforcement. except for molded corners, end cuts, and mounting facilities such as holes, slots, press-fit buttons, or the like, the item must be of one continuous cross section. for straight items with square end cuts and without mounting holes, slots or press-fit buttons see rubber strip. for items with round cross sections see seal, nonmetallic round section. excludes gasket and packing, preformed.
