Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 12335A23 specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
grooved
A measurement taken at right angles to the length of an aperture,in distinction from thickness.
0.578in.
A measurement of the longest dimension of an aperture,in distinction from width.
0.046in. and 0.093in.
A measurement from the bottom to the top of a cross section,in distinction from depth.
1.250in.
A measurement of the cross section taken at right angles to the length,in distinction from thickness.
1.421in.
The national stock number or the identification information of the end equipment for which the item is a part.
4110-01-534-7675
The structural characteristic of the item.
ONE-Piece
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
available lengths: 20 feet, 25 feet, 82 feet
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
d shape
Answers.
D shape
Schedule B number: 3926904500
nmfc 194090
Gaskets,washers & other seals
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-01-585-3504 SEAL,NONMETALLIC STRIP
Used on 4110-01-534-7675. d shape available lengths: 20 feet, 25 feet, 82 feet
- NIIN
- 015853504
- NIIN Date
- 05/24/10
- Schedule B
- 3926904500
- Name Code
- 36874
- FIIG
- A032A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- Historical Price
- $5.20 FT
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Army
Availability for 12335A23 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 60.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Fabricated nonmetallic materials
- NMFC (national motor freight code)
- 194090 WASHERS/SEALS
- UFC (universal freight code)
- 95100
Similar by Design Other seals with similar characteristics
Nothing similar to this part number was found in our inventory
12335A23 / Seal,nonmetallic stripWhat is the formal definition of this item?
An item fabricated from nonmetallic material designed to be used where there is no relative motion between joined parts. items having a square or rectangular cross section must be a single piece whose ends may have been secured together to form a specific shape. it may be formed to a specific shape, except round, with or without joints. it may have fabric, cord or metal reinforcement. except for molded corners, end cuts, and mounting facilities such as holes, slots, press-fit buttons, or the like, the item must be of one continuous cross section. for straight items with square end cuts and without mounting holes, slots or press-fit buttons see rubber strip. for items with round cross sections see seal, nonmetallic round section. excludes gasket and packing, preformed.
