Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. S6120-61188-012 specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
hollow bulb
A measurement of the smallest dimension of a cross section,in distinction from length or width.
0.045in.
A measurement from the bottom to the top of a cross section,in distinction from depth.
0.750in.
A measurement of the cross section taken at right angles to the length,in distinction from thickness.
2.280in.
The structural characteristic of the item.
TWO-Piece
The chemical compound or mechanical mixture properties of which the item is fabricated.
rubber
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.
used on nose door
Answers.
1EA
Rubber
Schedule B number: 3926904500
nmfc 194120
Gaskets,washers & other seals
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-00-975-5220 SEAL,NONMETALLIC SPECIAL SHAPED
- NIIN
- 009755220
- NIIN Date
- 01/01/60
- Schedule B
- 3926904500
- Name Code
- 32847
- FIIG
- A032A0
- Item Weight
- 0.400lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $164.93 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | S6120-61188-12 | Cage 78286 |
Major End Users Countries and entities
- - Department of The Air Force
- - Department of The Navy
- - U.s. Coast Guard
- - Brazil
- - Spain
- - Malaysia
- - Canada
- - Italy
Availability for S6120-61188-012 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 85.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Gaskets, (machinery and parts),(less than 35 feet)
- NMFC (national motor freight code)
- 194120 WASHERS/GASKETS/PCKG DVCS NOI SUB8
- UFC (universal freight code)
- 95100
Similar by Design Other seals with similar characteristics
Nothing similar to this part number was found in our inventory
S6120-61188-012 / Seal,nonmetallic special shapedWhat is the formal definition of this item?
An item fabricated from nonmetallic special shaped section. it may be (1) formed to a specific shape with or without joints, (2) a single piece whose ends have been secured together to form a specific shape, or (3) a straight item fabricated to a specific length for a specific application with end cuts or joints. items, except for molded corners, slot(s), press fit buttons, and the like must be of one continuous cross section. it is specifically designed for use in applications where there is no relative motion between joined parts. excludes bushing, nonmetallic; packing, performed; pad, cushioning;and seal, plain. for straight items with square end cuts and without mounting hole(s), slot(s), or press fit buttons, see nonmetallic special shaped section.
