Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. L835028A0062 specification
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
108.460in. and 108.710in. ⁓108-23/32"
A measurement from the bottom to the top of a cross section,in distinction from depth.
0.720in.
A measurement of the cross section taken at right angles to the length,in distinction from thickness.
1.094in. and 1.125in.
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.
gray
The chemical compound or mechanical mixture properties of which the item is fabricated.
rubber silicone class q
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ZZ-R-765, class 3b fed spec single material response
Answers.
1EA
Rubber silicone class q
Schedule B number: 3926904500
nmfc 194050
Gaskets,washers & other seals
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-01-342-5734 SEAL,NONMETALLIC SPECIAL SHAPED
108.460" overall length
- NIIN
- 013425734
- NIIN Date
- 07/26/91
- Schedule B
- 3926904500
- Name Code
- 32847
- FIIG
- A032A0
- Item Weight
- 5.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $758.83 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 835028A0062 | Cage 01365 |
Major End Users Countries and entities
- - Department of The Navy
- - U.s. Marine Corps
Availability for L835028A0062 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Gaskets, (machinery and parts),(less than 35 feet)
- NMFC (national motor freight code)
- 194050 GASKETS/RINGS PLUMBING FIXTURES
- UFC (universal freight code)
- 78100
Similar by Design Other seals with similar characteristics
Nothing similar to this part number was found in our inventory
L835028A0062 / Seal,nonmetallic special shapedWhat is the formal definition of this item?
An item fabricated from nonmetallic special shaped section. it may be (1) formed to a specific shape with or without joints, (2) a single piece whose ends have been secured together to form a specific shape, or (3) a straight item fabricated to a specific length for a specific application with end cuts or joints. items, except for molded corners, slot(s), press fit buttons, and the like must be of one continuous cross section. it is specifically designed for use in applications where there is no relative motion between joined parts. excludes bushing, nonmetallic; packing, performed; pad, cushioning;and seal, plain. for straight items with square end cuts and without mounting hole(s), slot(s), or press fit buttons, see nonmetallic special shaped section.
