Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 751-6402416-1 specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
special
The smallest measurement taken at right angles to the length of an item,in distinction from thickness.
0.194in.
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.
29.900in.
A measurement of the smallest dimension of a cross section,in distinction from length or width.
0.170in.
A measurement from the bottom to the top of a cross section,in distinction from depth.
0.380in.
A measurement of the cross section taken at right angles to the length,in distinction from thickness.
0.435in.
A minor measurement from the bottom to the top of an object,in distinction from depth.
0.322in.
The national stock number or the identification information of the end equipment for which the item is a part.
torpedo tube
The structural characteristic of the item.
solid
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
molded continuous ring gasket
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
CROSS-Sectional width (base) is angled @ 5 degrees from one side to the other
The chemical compound or mechanical mixture properties of which the item is fabricated.
rubber ETHYLENE-Propylene class epm
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-G-19769, GR-80 mil spec single material response
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
circular
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
MIL-G-19769 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
The document designator of the specification or standard which established the item of supply.
81349 - MIL-G-19769 government specification
Answers.
1EA
Circular
Rubber ethylene-propylene class epm
Schedule B number: 3926904500
nmfc 194050
Gaskets,washers & other seals
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-01-500-8687 SEAL,NONMETALLIC SPECIAL SHAPED
Used on torpedo tube. circular cross-sectional width (base) is angled @ 5 degrees from one side to the other molded continuous ring gasket
- NIIN
- 015008687
- NIIN Date
- 09/13/02
- Schedule B
- 3926904500
- Name Code
- 32847
- FIIG
- A032A0
- Item Weight
- 0.700lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $645.65 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 751-6402411-3 | Cage 53711 |
| 2. | 211032981 | Cage 53711 |
| 3. | 751-6402416 | Cage 53711 |
| 4. | 211095726 | Cage 53711 |
| 5. | 8612484 | Cage 53711 |
Major End Users Countries and entities
- - Department of The Navy
Availability for 751-6402416-1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Gaskets, (machinery and parts),(less than 35 feet)
- NMFC (national motor freight code)
- 194050 GASKETS/RINGS PLUMBING FIXTURES
- UFC (universal freight code)
- 78100
Similar by Design Other seals with similar characteristics
Nothing similar to this part number was found in our inventory
751-6402416-1 / Seal,nonmetallic special shapedWhat is the formal definition of this item?
An item fabricated from nonmetallic special shaped section. it may be (1) formed to a specific shape with or without joints, (2) a single piece whose ends have been secured together to form a specific shape, or (3) a straight item fabricated to a specific length for a specific application with end cuts or joints. items, except for molded corners, slot(s), press fit buttons, and the like must be of one continuous cross section. it is specifically designed for use in applications where there is no relative motion between joined parts. excludes bushing, nonmetallic; packing, performed; pad, cushioning;and seal, plain. for straight items with square end cuts and without mounting hole(s), slot(s), or press fit buttons, see nonmetallic special shaped section.
