Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 65-26776-1 specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
hollow bulb
The process used in manufacturing the item.
solid
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
5.500in. ⁓5-1/2"
The means used to attach the item.
round hole
The number of attachment features included.
5
The length of a straight line which passes through the center of an attachment hole,and terminates at the circumference.
0.250in.
The length of a straight line which passes through the center of a cross section,and terminates at the inside circumference.
0.562in.
A measurement of the smallest dimension of a cross section,in distinction from length or width.
0.125in.
A measurement from the bottom to the top of a cross section,in distinction from depth.
0.750in.
A measurement of the cross section taken at right angles to the length,in distinction from thickness.
1.500in.
The structural characteristic of the item.
solid
37.0 degrees
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 2024 internally MOLDED-In reinforcement
The chemical compound or mechanical mixture properties of which the item is fabricated.
plastic polyester backing
The chemical compound or mechanical mixture properties of which the item is fabricated.
rubber silicone class q
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-A-200/3 fed spec single material response internally MOLDED-In reinforcement
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
strip
Answers.
Strip
Rubber silicone class q
Plastic polyester backing
Aluminum alloy 2024 internally molded-in reinforcement
Schedule B number: 3926904500
Gaskets,washers & other seals
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-00-193-7657 SEAL,NONMETALLIC SPECIAL SHAPED
strip 5.500" overall length
- NIIN
- 001937657
- NIIN Date
- 03/16/70
- Schedule B
- 3926904500
- Name Code
- 32847
- FIIG
- A032A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - New Zealand
Availability for 65-26776-1 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other seals with similar characteristics
Nothing similar to this part number was found in our inventory
65-26776-1 / Seal,nonmetallic special shapedWhat is the formal definition of this item?
An item fabricated from nonmetallic special shaped section. it may be (1) formed to a specific shape with or without joints, (2) a single piece whose ends have been secured together to form a specific shape, or (3) a straight item fabricated to a specific length for a specific application with end cuts or joints. items, except for molded corners, slot(s), press fit buttons, and the like must be of one continuous cross section. it is specifically designed for use in applications where there is no relative motion between joined parts. excludes bushing, nonmetallic; packing, performed; pad, cushioning;and seal, plain. for straight items with square end cuts and without mounting hole(s), slot(s), or press fit buttons, see nonmetallic special shaped section.
