Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 17P8D9333-529 specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
hollow bulb
The length of a straight line which passes through the center of a cross section,and terminates at the inside circumference.
0.550in.
A measurement of the smallest dimension of a cross section,in distinction from length or width.
0.070in. and 0.130in.
A measurement from the bottom to the top of a cross section,in distinction from depth.
0.720in. and 0.780in.
A measurement of the cross section taken at right angles to the length,in distinction from thickness.
1.136in.
The national stock number or the identification information of the end equipment for which the item is a part.
C-17A aircraft
The structural characteristic of the item.
TWO-Piece
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
seals, fan duct - fixed duct
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
seal is made from dash number: -35, seal (molded elastomeric fire wall; spec dms 1854 type 4 reinforced with ceramic cloth, 1-ply; -69, cover (cloth aramid knitted mesh type HT-2002 frommohawk fabric co, inc)
Answers.
1EA
Schedule B number: 3926904500
Gaskets,washers & other seals
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-01-500-1632 SEAL,NONMETALLIC SPECIAL SHAPED
Used on c-17a aircraft. seal is made from dash number: -35, seal (molded elastomeric fire wall; spec dms 1854 type 4 reinforced with ceramic cloth, 1-ply; -69, cover (cloth aramid knitted mesh type ht-2002 frommohawk fabric co, inc) seals, fan duct - fixed duct
- NIIN
- 015001632
- NIIN Date
- 08/15/02
- Schedule B
- 3926904500
- Name Code
- 32847
- FIIG
- A032A0
- QUP
- 1
- Historical Price
- $433.75 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Department of The Air Force
Availability for 17P8D9333-529 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other seals with similar characteristics
Nothing similar to this part number was found in our inventory
17P8D9333-529 / Seal,nonmetallic special shapedWhat is the formal definition of this item?
An item fabricated from nonmetallic special shaped section. it may be (1) formed to a specific shape with or without joints, (2) a single piece whose ends have been secured together to form a specific shape, or (3) a straight item fabricated to a specific length for a specific application with end cuts or joints. items, except for molded corners, slot(s), press fit buttons, and the like must be of one continuous cross section. it is specifically designed for use in applications where there is no relative motion between joined parts. excludes bushing, nonmetallic; packing, performed; pad, cushioning;and seal, plain. for straight items with square end cuts and without mounting hole(s), slot(s), or press fit buttons, see nonmetallic special shaped section.
