Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. F5980 specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
circular with center aperture
The process used in manufacturing the item.
solid
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.
50.000in.
The length of a straight line which passes through the center of a cross section,and terminates at the inside circumference.
0.187in.
The length of a straight line which passes through the center of a cross section,and terminates at the outside circumference.
0.375in.
The structural characteristic of the item.
solid
The chemical compound or mechanical mixture properties of which the item is fabricated.
rubber synthetic
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
circular
Answers.
Circular
Rubber synthetic
Schedule B number: 3926904500
nmfc 194120
Gaskets,washers & other seals
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-00-805-0679 SEAL,NONMETALLIC ROUND SECTION
circular
- NIIN
- 008050679
- NIIN Date
- 01/01/63
- Schedule B
- 3926904500
- Name Code
- 36873
- FIIG
- A032A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Austria
- - Greece
Availability for F5980 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Gaskets, (machinery and parts),(less than 35 feet)
- NMFC (national motor freight code)
- 194120 WASHERS/GASKETS/PCKG DVCS NOI
- UFC (universal freight code)
- 95100
Similar by Design Other seals with similar characteristics
Nothing similar to this part number was found in our inventory
F5980 / Seal,nonmetallic round sectionWhat is the formal definition of this item?
An item fabricated from nonmetallic material designed to be used where there is no relative motion between joined parts. items with a solid cross section must be a single piece whose ends may have been secured together to form a specific shape. it may be formed to specific shape with or without joints. it may be a straight item of a specific length with end cuts or joints. it may have a solid or tubular cross section. except for molded corners, end cuts, and mounting facilities such as mounting holes, slots, press-fit buttons, or the like, the item must be of one continuous round cross section. it may have fabric, cord or metal reinforcement. for straight items with square end cuts and without mounting holes, slots or press-fit buttons see rubber round section and tubing, nonmetallic. excludes gasket and packing, preformed.
