Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. C5118859-5 specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
rectangular
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.
1.031in.
A measurement from the bottom to the top of a cross section,in distinction from depth.
0.515in.
A measurement of the cross section taken at right angles to the length,in distinction from thickness.
0.062in.
The national stock number or the identification information of the end equipment for which the item is a part.
an/TRQ-32 (v) 2
The structural characteristic of the item.
ONE-Piece
The chemical compound or mechanical mixture properties of which the item is fabricated.
leather cattlehide
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
circular
Answers.
1EA
Circular
Leather cattlehide
Schedule B number: 3926904500
nmfc 061700
Gaskets,washers & other seals
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-01-280-0881 SEAL,NONMETALLIC ROUND SECTION
Used on an/trq-32(v)2. circular
- NIIN
- 012800881
- NIIN Date
- 05/31/88
- Schedule B
- 3926904500
- Name Code
- 36873
- FIIG
- A032A0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $101.33 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Defense Logistics Agency
Availability for C5118859-5 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Rating variable
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 061700 ELEC APPLIANCES/INSTRUMENTS NOI
- UFC (universal freight code)
- 34580
Similar by Design Other seals with similar characteristics
Nothing similar to this part number was found in our inventory
C5118859-5 / Seal,nonmetallic round sectionWhat is the formal definition of this item?
An item fabricated from nonmetallic material designed to be used where there is no relative motion between joined parts. items with a solid cross section must be a single piece whose ends may have been secured together to form a specific shape. it may be formed to specific shape with or without joints. it may be a straight item of a specific length with end cuts or joints. it may have a solid or tubular cross section. except for molded corners, end cuts, and mounting facilities such as mounting holes, slots, press-fit buttons, or the like, the item must be of one continuous round cross section. it may have fabric, cord or metal reinforcement. for straight items with square end cuts and without mounting holes, slots or press-fit buttons see rubber round section and tubing, nonmetallic. excludes gasket and packing, preformed.
