Serving our customers with quality and safety first.
circular
solid
0.531in.
0.719in.
7.344in.
9.281in.
0.188in.
solid
rubber polyisoprene natural class nr or rubber BUTADIENE-Styrene class sbr or rubber ISOBUTYLENE-Isoprene class iir or rubber ETHYLENE-PROPYLENE-Diene class epdm or rubber polyisoprene synthetic class ir
astm D2000 4AA615 assn std all material responses
NON-Circular
1EA
Non-circular
Rubber polyisoprene natural class nr or rubber butadiene-styrene class sbr or rubber isobutylene-isoprene class iir or rubber ethylene-propylene-diene class epdm or rubber polyisoprene synthetic class ir
Schedule B number: 3926904500
nmfc 194120
Gaskets,washers & other seals
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
non-circular
1. | 0740609 | Cage S3002 |
2. | 25704-281600-21-0 | Cage D1839 |
3. | 25704-281600-21-0 | Cage D2692 |
4. | 500393 | Cage 08638 |
5. | 500393 | Cage 94580 |
Nothing similar to this part number was found in our inventory
An item fabricated from nonmetallic material designed to be used where there is no relative motion between joined parts. items with a solid cross section must be a single piece whose ends may have been secured together to form a specific shape. it may be formed to specific shape with or without joints. it may be a straight item of a specific length with end cuts or joints. it may have a solid or tubular cross section. except for molded corners, end cuts, and mounting facilities such as mounting holes, slots, press-fit buttons, or the like, the item must be of one continuous round cross section. it may have fabric, cord or metal reinforcement. for straight items with square end cuts and without mounting holes, slots or press-fit buttons see rubber round section and tubing, nonmetallic. excludes gasket and packing, preformed.