Serving our customers with quality and safety first.
open channel
5.500in.
1.000in.
0.625in.
0.625in.
0.125in.
0.125in.
0.125in.
0.125in.
0.125in.
0.125in.
0.125in.
0.125in.
0.125in.
solid
90.0 degrees
90.0 degrees
90.0 degrees
90.0 degrees
left square end
identical
rubber BUTADIENE-Styrene class sbr
MIL-R-6855, cl 3 mil spec single material response
circular
retainer, glass, P0Rtlight
Circular
Rubber butadiene-styrene class sbr
Schedule B number: 3926904500
nmfc 194120
Gaskets,washers & other seals
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
circular
1. | B8005-02-007FN32 | Cage 81996 |
2. | 0207032 | Cage 00447 |
Nothing similar to this part number was found in our inventory
An item fabricated from nonmetallic channel. it may be (1) formed to a specific shape with or without joints, (2) a single piece whose ends have been secured together to form a specific shape, or (3) a straight item fabricated to a specific length for a specific application with end cuts or joints. items except for molded corners, end cut(s), and mounting facilities, such as mounting hole(s), slot(s), press fit buttons, and the like, must be one continuous cross section. it may have fabric, cord, or metal reinforcement. it is specifically designed for use in applications where there is no relative motion between joined parts. excludes gasket; grommet, nonmetallic; and packing, preformed. for straight items with square end cuts and without mounting hole(s), slot(s), or press fit buttons, see nonmetallic channel.