Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 540330-3 specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
open channel
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
45.000in. ⁓45-1/64"
The means used to attach the item.
cemented
0.312in.
0.437in.
0.437in.
0.062in.
0.062in.
0.062in.
0.062in.
0.062in.
The structural characteristic of the item.
solid
90.0 degrees
90.0 degrees
60.0 degrees
60.0 degrees
The style designation indicating the configuration that most nearly corresponds to the appearance of the left tip.
left square end
An indication of whether or not the right tip is identical to the left tip.
identical
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
left leg outside surface has molded on bead strip entire length 0.062 inch w x 0.062 inch h with 0.031 inch radius
The chemical compound or mechanical mixture properties of which the item is fabricated.
rubber
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
strip
Answers.
1EA
Strip
Rubber
Schedule B number: 3926904500
Gaskets,washers & other seals
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-01-026-6336 SEAL,NONMETALLIC CHANNEL
strip left leg outside surface has molded on bead strip entire length 0.062 inch w x 0.062 inch h with 0.031 inch radius 45.000" overall length
- NIIN
- 010266336
- NIIN Date
- 08/28/76
- Schedule B
- 3926904500
- Name Code
- 32846
- FIIG
- A032A0
- QUP
- 1
- Historical Price
- $75.65 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Federal Aviation Administration
Availability for 540330-3 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other seals with similar characteristics
Nothing similar to this part number was found in our inventory
540330-3 / Seal,nonmetallic channelWhat is the formal definition of this item?
An item fabricated from nonmetallic channel. it may be (1) formed to a specific shape with or without joints, (2) a single piece whose ends have been secured together to form a specific shape, or (3) a straight item fabricated to a specific length for a specific application with end cuts or joints. items except for molded corners, end cut(s), and mounting facilities, such as mounting hole(s), slot(s), press fit buttons, and the like, must be one continuous cross section. it may have fabric, cord, or metal reinforcement. it is specifically designed for use in applications where there is no relative motion between joined parts. excludes gasket; grommet, nonmetallic; and packing, preformed. for straight items with square end cuts and without mounting hole(s), slot(s), or press fit buttons, see nonmetallic channel.
