Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 11M34 specification
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
2.750in. ⁓2-3/4"
0.900in.
0.625in.
0.065in.
0.090in.
0.160in.
The structural characteristic of the item.
solid
The style designation indicating the configuration that most nearly corresponds to the appearance of the left tip.
square end
An indication of whether or not the right tip is identical to the left tip.
not identical
The style designation indicating the configuration that most nearly corresponds to the appearance of the right tip.
outer bulbous
err default
err default
95.0 degrees
The chemical compound or mechanical mixture properties of which the item is fabricated.
rubber BUTADIENE-Acrylonitrile class nbr
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-6855, cl 1, gr 40 mil spec single material response
Answers.
Rubber butadiene-acrylonitrile class nbr
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-00-623-6451 SEAL,NONMETALLIC ANGLE
2.750" overall length
- NIIN
- 006236451
- NIIN Date
- 03/01/75
- Schedule B
- Name Code
- 32845
- FIIG
- A032A0
- QUP
- Historical Price
- $14.48 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Air Force
- - Germany
Availability for 11M34 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 60.0
- LCL (less than a car load rating)
- 77.5
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Gaskets, (machinery and parts),(less than 35 feet)
- NMFC (national motor freight code)
- 194090 WASHERS/SEALS
- UFC (universal freight code)
- 95100
Similar by Design Other seals with similar characteristics
Nothing similar to this part number was found in our inventory
11M34 / Seal,nonmetallic angleWhat is the formal definition of this item?
An item fabricated from nonmetallic angle. it may be (1) formed to a specific shape with or without joints, (2) a single piece whose ends have been secured together to form a specific shape, or (3) a straight item fabricated to a specific length for a specific application with end cuts or joints. items except for molded corners, end cut(s), and mounting hole(s), slot(s), press fit buttons and the like, must be of one continuous cross section. it may have fabric, cord, or metal reinforcement. it is specifically designed for use in applications where there is no relative motion between joined parts. excludes bushing, nonmetallic; gasket; and packing preformed. for straight items with square end cuts and without mounting hole(s), slot(s), or press fit buttons, see nonmetallic angle.
