Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. DKA12CPX specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
plain rectangular, straight face
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.
12.1 mm
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
17.0 mm
3.0 mm
The national stock number or the identification information of the end equipment for which the item is a part.
stryker
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
seal for banjo fitting
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
thread M12 x 1.5
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
Answers.
1EA
Steel
17.0 millimeters
12.1 millimeters
Schedule B number: 3926904500
nmfc 194090
Gaskets,washers & other seals
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-01-600-1118 SEAL RING,METAL
Used on stryker. thread M12 x 1.5 seal for banjo fitting 17.0mm outside diameter 12.1mm inside diameter
- NIIN
- 016001118
- NIIN Date
- 11/09/11
- Schedule B
- 3926904500
- Name Code
- 21205
- FIIG
- A08400
- Item Weight
- 0.200lbs
- Item Dimensions
- 8 X 8 X 2
- QUP
- 1
- Historical Price
- $7.45 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | DKA12A3CX | Cage 1KPD5 |
| 2. | DKA12A3CX | Cage 1KPD5 |
Major End Users Countries and entities
- - Department of The Army
Availability for DKA12CPX A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 60.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 194090 WASHERS/SEALS
- UFC (universal freight code)
- 95100
Similar by Design Other seal rings with similar characteristics
Nothing similar to this part number was found in our inventory
DKA12CPX / Seal ring,metalWhat is the formal definition of this item?
A circular shaped item designed to be installed in a specially prepared groove or counterbore to provide a low pressure seal. it may be supplied in various cross-sectional shapes and is cut through at one point to allow for installation and fitting. excludes items whose primary function is to provide sealing, wiping, or wearing surface capabilities for piston configurations. see also ring, piston and ring, wiper.
