Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 22663-1 specification
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
8.434in. and 8.438in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the ring.
expanding concentric
2.0920in. and 2.0940in.
0.3430in.
A numeric value that reflects the hardness of a metallic item when used in conjunction with a hardness rating scale.
27.0 rockwell c and 34.0 rockwell c
Answers.
1EA
Expanding concentric
8.434 inches minimum and 8.438 inches maximum
Schedule B number: 3926904500
nmfc 095190
Gaskets,washers & other seals
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-00-962-2633 SEAL RING,METAL
expanding concentric ring style 8.434" outside diameter
- NIIN
- 009622633
- NIIN Date
- 01/01/62
- Schedule B
- 3926904500
- Name Code
- 21205
- FIIG
- A08400
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $7,096.40 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 22663 | Cage 55820 |
Major End Users Countries and entities
- - Department of The Navy
- - Republic of Korea
- - Turkey
Availability for 22663-1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Motors and parts, (machinery and parts),(less than 35 feet)
- NMFC (national motor freight code)
- 095190 HARDWARE, NOI SUB 9
- UFC (universal freight code)
- 49790
Similar by Design Other seal rings with similar characteristics
Nothing similar to this part number was found in our inventory
22663-1 / Seal ring,metalWhat is the formal definition of this item?
A circular shaped item designed to be installed in a specially prepared groove or counterbore to provide a low pressure seal. it may be supplied in various cross-sectional shapes and is cut through at one point to allow for installation and fitting. excludes items whose primary function is to provide sealing, wiping, or wearing surface capabilities for piston configurations. see also ring, piston and ring, wiper.
