Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 1S766-5A7 specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
plain keystone, straight radii face
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.
3.025in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the ring.
contracting concentric
0.1310in.
0.6090in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the joint.
A numeric value that reflects the hardness of a metallic item when used in conjunction with a hardness rating scale.
90.0 brinell standard
The chemical compound or mechanical mixture properties of which the item is fabricated.
iron
Answers.
Iron
Contracting concentric
3.025 inches
Schedule B number: 3926904500
nmfc 194160
Gaskets,washers & other seals
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-00-975-7221 SEAL RING,METAL
contracting concentric ring style 3.025" inside diameter
- NIIN
- 009757221
- NIIN Date
- 01/01/62
- Schedule B
- 3926904500
- Name Code
- 21205
- FIIG
- A08400
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- --
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Availability for 1S766-5A7 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 194160 WASHER OR GASKETS, IRON OR STEEL,
- UFC (universal freight code)
- 55210
Similar by Design Other seal rings with similar characteristics
Nothing similar to this part number was found in our inventory
1S766-5A7 / Seal ring,metalWhat is the formal definition of this item?
A circular shaped item designed to be installed in a specially prepared groove or counterbore to provide a low pressure seal. it may be supplied in various cross-sectional shapes and is cut through at one point to allow for installation and fitting. excludes items whose primary function is to provide sealing, wiping, or wearing surface capabilities for piston configurations. see also ring, piston and ring, wiper.
