Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 11450709-1 specification
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.
1.101in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the ring.
contracting concentric
The style designation indicating the configuration that most nearly corresponds to the appearance of the joint.
vertical joint
The chemical compound or mechanical mixture properties of which the item is fabricated.
nickel insert
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5598 fed spec single material response insert
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
lead insert
Answers.
Nickel insert
Contracting concentric
1.101 inches
Schedule B number: 3926904500
nmfc 136500
Gaskets,washers & other seals
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-01-446-7970 SEAL RING,METAL
lead insert surface treated contracting concentric ring style 1.101" inside diameter
- NIIN
- 014467970
- NIIN Date
- 07/17/97
- Schedule B
- 3926904500
- Name Code
- 21205
- FIIG
- A08400
- QUP
- Historical Price
- $50.03 EA
- DEMIL / ITAR
- USML/ITAR controlled item (Code: B)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 48006-12-07-2-LPA | Cage 04319 |
Major End Users Countries and entities
- - Department of The Army
Availability for 11450709-1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Gaskets, (machinery and parts),(less than 35 feet)
- NMFC (national motor freight code)
- 136500 METAL NOI/METAL ALLOYS NOI
- UFC (universal freight code)
- 68455
Similar by Design Other seal rings with similar characteristics
Nothing similar to this part number was found in our inventory
11450709-1 / Seal ring,metalWhat is the formal definition of this item?
A circular shaped item designed to be installed in a specially prepared groove or counterbore to provide a low pressure seal. it may be supplied in various cross-sectional shapes and is cut through at one point to allow for installation and fitting. excludes items whose primary function is to provide sealing, wiping, or wearing surface capabilities for piston configurations. see also ring, piston and ring, wiper.
