Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. C-211-5821 specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
square
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
27.000in. and 27.500in.
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.
26.000in. and 26.500in.
A measurement from the bottom to the top of a cross section,in distinction from depth.
0.250in.
The means by which the item is lubricated.
coated
Indicates the type of joint/s/ on the item.
SCARF-Bearing surface
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.
zzzy
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
item must comply with requirements of defense supply center philadelphia production standard no. PO0054Nrp; cement joint
The chemical compound or mechanical mixture properties with which the item is lubricated.
grease
The chemical compound or mechanical mixture properties of which the item is fabricated.
wool
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.
special quality control testing
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
circular
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-P-23199 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.
areference number differentiating material will be in accordance with naval inventory control point activity hx quality control. manufacturing and testing specifications available at the dla icp
Answers.
1EA
Circular
Wool
27.000 inches minimum and 27.500 inches maximum
Schedule B number: 8484200000
nmfc 194120
Mechanical seals
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-01-065-8855 FELT,MECHANICAL,PREFORMED
circular item must comply with requirements of defense supply center philadelphia production standard no. PO0054nrp; cement joint 27.000" outside diameter
- NIIN
- 010658855
- NIIN Date
- 09/25/78
- Schedule B
- 8484200000
- Name Code
- 18443
- FIIG
- A032A0
- Item Weight
- 0.400lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $191.18 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | PO0054NRP | Cage 14153 |
Major End Users Countries and entities
- - Department of The Navy
Availability for C-211-5821 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Gaskets, (machinery and parts),(less than 35 feet)
- NMFC (national motor freight code)
- 194120 WASHERS/GASKETS/PCKG DVCS NOI
- UFC (universal freight code)
- 95100
Similar by Design Other felts with similar characteristics
Nothing similar to this part number was found in our inventory
C-211-5821 / Felt,mechanical,preformedWhat is the formal definition of this item?
An item manufactured to predetermined dimensions. it is either a precut strip or an item of various peripheral shapes and may contain bolt hole(s). it is used as a seal, wiper, mounting pad or for similar purposes. excludes gasket and packing preformed.
