Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. ASTM D 2475 specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
square
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
20.500in. ⁓20-1/2"
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
0.250in.
A measurement from the bottom to the top of a cross section,in distinction from depth.
0.250in.
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
ends must be cut on 60 deg angle from corner and deparallel w/each other
The chemical compound or mechanical mixture properties of which the item is fabricated.
wool
Answers.
1EA
Wool
0.250 inches
Schedule B number: 8484200000
nmfc 194020
Mechanical seals
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-00-205-1390 FELT,MECHANICAL,PREFORMED
ends must be cut on 60 deg angle from corner 0.250" overall width 20.500" overall length
- NIIN
- 002051390
- NIIN Date
- 01/01/63
- Schedule B
- 8484200000
- Name Code
- 18443
- FIIG
- A032A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $19.65 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 42-65401 | Cage 62983 |
| 2. | 42-65401 | Cage 62983 |
| 3. | 42-65401 | Cage 62983 |
| 4. | 42-65401 | Cage 62983 |
Major End Users Countries and entities
- - Department of The Navy
- - Turkey
Availability for ASTM D 2475 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 100.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Gaskets, (machinery and parts),(less than 35 feet)
- NMFC (national motor freight code)
- 194020 WASHERS/GASKETS/PCKG DVC ETC FELT
- UFC (universal freight code)
- 95050
Similar by Design Other felts with similar characteristics
Nothing similar to this part number was found in our inventory
ASTM D 2475 / Felt,mechanical,preformedWhat is the formal definition of this item?
An item manufactured to predetermined dimensions. it is either a precut strip or an item of various peripheral shapes and may contain bolt hole(s). it is used as a seal, wiper, mounting pad or for similar purposes. excludes gasket and packing preformed.
