Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. M83528/004F028 specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
emi
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
1.750in. and 1.770in. ⁓1-25/32"
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
1.860in. and 1.890in. ⁓1-57/64"
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.
-65.0 deg celsius and 160.0 deg celsius
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.
0.162in. and 0.182in.
A measurement of the center to center distance between the bolt holes along the width.
1.490in. and 1.510in.
A measurement of the center to center distance between the bolt holes along the length.
1.490in. and 1.510in.
A measurement from the bottom to the top of a cross section,in distinction from depth.
0.301in.
The number of bolt holes provided on the item.
4
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
the center hole diameter is 1.75 in.; the connector shell size is 25
The chemical compound or mechanical mixture properties of which the item is fabricated.
silver emi/rfi conductor
An indication of the precious material and its location in the item.
emi/rfi conductive particles silver
Identification of the precious material contained in the item.
silver
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
NON-Circular
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-DTL-83528 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
The document designator of the specification or standard which established the item of supply.
81349-MIL-DTL-83528/4 government specification
Answers.
Non-circular
Silver emi/rfi conductor
4
1.750 inches minimum and 1.770 inches maximum
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-01-543-6358 GASKET
non-circular the center hole diameter is 1.75 in.; the connector shell size is 25 4 bolt hole quantity 1.860" overall length 1.750" hole diameter
- NIIN
- 015436358
- NIIN Date
- 09/18/06
- Schedule B
- Name Code
- 04522
- FIIG
- A032A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Contains silver
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | MIL-DTL-83528/4 | Cage 81349 |
| 2. | MIL-G-83528/4 | Cage 81349 |
Major End Users Countries and entities
- - United Kingdom
Availability for M83528/004F028 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other gaskets with similar characteristics
Nothing similar to this part number was found in our inventory
M83528/004F028 / GasketWhat is the formal definition of this item?
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. it may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. it may be made to any predetermined dimension and shape. excludes flat disks, items made of felt material and items having joints. for round metal and plastic items with an aperture and a solid rectangular cross section, see washer, flat; shim; bearing, washer, thrust; and spacer ring. excludes disk, valve; seal, nonmetallic angle; seal, nonmetallic channel; seal, nonmetallic special shaped section; shielding gasket, electronic; and ring, sealing jar.
