Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 7116369 specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
solid single or composition
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.515in. and 0.532in. ⁓35/64"
The length of a straight line which passes through the center of a bolt circle,and terminates at the circumference.
8.200in.
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
9.000in.
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.
2.500in. and 2.615in.
A measurement of the smallest dimension of a cross section,in distinction from length or width.
0.188in.
The number of bolt holes provided on the item.
5
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
3holes are equally spaced at 90 degrees from the centerline of the aperture and 2 holes spaced at 70 degrees from the centerline of the aperture and 30 degrees apart off the same centerline
The chemical compound or mechanical mixture properties of which the item is fabricated.
rubber polychloroprene
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-R-6855, class 2, type a, grade 60 mil spec single material response
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
circular
Answers.
1EA
Circular
Rubber polychloroprene
5
9.000 inches
0.515 inches minimum and 0.532 inches maximum
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-01-479-0090 GASKET
circular 3holes are equally spaced at 90 degrees from the centerline of the aperture 5 bolt hole quantity 9.000" outside diameter 0.515" hole diameter
- NIIN
- 014790090
- NIIN Date
- 10/05/00
- Schedule B
- Name Code
- 04522
- FIIG
- A032A0
- Item Weight
- 0.800lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $762.68 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
Availability for 7116369 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Gaskets, (machinery and parts),(less than 35 feet)
- NMFC (national motor freight code)
- 194050 GASKETS/RINGS PLUMBING FIXTURES
- UFC (universal freight code)
- 78100
Similar by Design Other gaskets with similar characteristics
Nothing similar to this part number was found in our inventory
7116369 / GasketWhat is the formal definition of this item?
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. it may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. it may be made to any predetermined dimension and shape. excludes flat disks, items made of felt material and items having joints. for round metal and plastic items with an aperture and a solid rectangular cross section, see washer, flat; shim; bearing, washer, thrust; and spacer ring. excludes disk, valve; seal, nonmetallic angle; seal, nonmetallic channel; seal, nonmetallic special shaped section; shielding gasket, electronic; and ring, sealing jar.
