Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 5599204-1 specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
solid single or composition
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.467in. and 0.474in. ⁓31/64"
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
36.380in. ⁓36-25/64"
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
21.000in.
A measurement of the longest dimension of an aperture,in distinction from width.
34.625in.
A measurement of the smallest dimension of a cross section,in distinction from length or width.
0.0065in. and 0.0135in.
The number of bolt holes provided on the item.
30
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
the item has a second set of four bolt holes with a diameter of 0.413in. minus 0.001 and plus 0.006in.; the left end of has a 0.500 recesse from the length side and 1.50 inch recess from width side; the right side inside corners are 0.44in. by 45 degrees and the left side inside corners have a 30 degree angle
The chemical compound or mechanical mixture properties of which the item is fabricated.
paper
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
astm F104 assn std single material response
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
NON-Circular
Answers.
1EA
Non-circular
Paper
30
21.000 inches
0.467 inches minimum and 0.474 inches maximum
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-01-323-2326 GASKET
non-circular the item has a second set of four bolt holes with a diameter of 0.413" minus 0.001 30 bolt hole quantity 21.000" overall width 36.380" overall length 0.467" hole diameter
- NIIN
- 013232326
- NIIN Date
- 07/25/90
- Schedule B
- Name Code
- 04522
- FIIG
- A032A0
- Item Weight
- 0.000lbs
- Item Dimensions
- QUP
- 1
- Historical Price
- $99.65 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Department of The Navy
- - Spain
- - Canada
Availability for 5599204-1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 194120 WASHERS/GASKETS/PCKG DVCS NOI
- UFC (universal freight code)
- 95100
Similar by Design Other gaskets with similar characteristics
Nothing similar to this part number was found in our inventory
5599204-1 / GasketWhat is the formal definition of this item?
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. it may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. it may be made to any predetermined dimension and shape. excludes flat disks, items made of felt material and items having joints. for round metal and plastic items with an aperture and a solid rectangular cross section, see washer, flat; shim; bearing, washer, thrust; and spacer ring. excludes disk, valve; seal, nonmetallic angle; seal, nonmetallic channel; seal, nonmetallic special shaped section; shielding gasket, electronic; and ring, sealing jar.
