Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 205B713-1 specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
solid single or composition
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.313in. ⁓21/64"
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
4.313in. ⁓4-21/64"
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
4.313in.
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.
4.000in.
0.469in.
A measurement of the center to center distance between the bolt holes along the width.
3.375in.
A measurement of the center to center distance between the bolt holes along the length.
3.375in.
0.469in.
0.469in.
A measurement of the smallest dimension of a cross section,in distinction from length or width.
0.063in.
The number of bolt holes provided on the item.
4
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.
zzzy
The chemical compound or mechanical mixture properties of which the item is fabricated.
paper and glue and glycerin
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
HH-P-96 fed spec all material responses
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.
special quality control testing
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
NON-Circular
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-P-23199 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.
as differentiated by packaging which must conform to ships parts control center special quality control provisions
Answers.
1EA
Non-circular
Paper and glue and glycerin
4
4.313 inches
0.313 inches
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-00-202-0787 GASKET
non-circular 4 bolt hole quantity 4.313" overall width 4.313" overall length 0.313" hole diameter
- NIIN
- 002020787
- NIIN Date
- 04/06/73
- Schedule B
- Name Code
- 04522
- FIIG
- A032A0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $3.05 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 1080H30H79 | Cage D9182 |
| 2. | 1080H31H23 | Cage D9182 |
| 3. | 1080H37H44 | Cage D9182 |
| 4. | 1080H39H42 | Cage D9182 |
Major End Users Countries and entities
- - Department of The Navy
Availability for 205B713-1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Gaskets, (machinery and parts),(less than 35 feet)
- NMFC (national motor freight code)
- 194120 WASHERS/GASKETS/PCKG DVCS NOI
- UFC (universal freight code)
- 95100
Similar by Design Other gaskets with similar characteristics
Nothing similar to this part number was found in our inventory
205B713-1 / GasketWhat is the formal definition of this item?
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. it may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. it may be made to any predetermined dimension and shape. excludes flat disks, items made of felt material and items having joints. for round metal and plastic items with an aperture and a solid rectangular cross section, see washer, flat; shim; bearing, washer, thrust; and spacer ring. excludes disk, valve; seal, nonmetallic angle; seal, nonmetallic channel; seal, nonmetallic special shaped section; shielding gasket, electronic; and ring, sealing jar.
