Serving our customers with quality and safety first.
solid single or composition
0.281in. ⁓9/32"
3.500in.
4.125in.
1.750in.
0.062in.
4
45.0 shore durometer a and 55.0 shore durometer a
0.312 in. radius keyway on periphery of aperture spaced 45 deg below bolt hole located at 9 o clock
rubber ETHYLENE-Propylene class epm or rubber BUTADIENE-Styrene class sbr or rubber ISOBUTYLENE-Isoprene class iir
astm D2000, 3BA510 assn std all material responses
circular
Circular
Rubber ethylene-propylene class epm or rubber butadiene-styrene class sbr or rubber isobutylene-isoprene class iir
4
4.125 inches
0.281 inches
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
circular 0.312 in. radius keyway on periphery of aperture spaced 45 deg below bolt hole located at 9 o clock 4 bolt hole quantity 4.125" outside diameter 0.281" hole diameter
1. | M474-2-35 | Cage 0L8N4 |
2. | M4746-2-35 | Cage 0L8N4 |
3. | 6101 | Cage 0ATF2 |
4. | 933-1-56893 | Cage 0EXU3 |
5. | 11YS18143 | Cage 57526 |
6. | 6G20098 | Cage 23382 |
7. | A6589 | Cage 34623 |
8. | 17-13-4 | Cage 60528 |
9. | 18S2439 | Cage 58141 |
10. | 6101 | Cage 54108 |
11. | 933-1-56893 | Cage 12793 |
12. | 11YS18143 | Cage 23040 |
13. | 795-0030 | Cage 63810 |
14. | 20098 | Cage 63810 |
Nothing similar to this part number was found in our inventory
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. it may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. it may be made to any predetermined dimension and shape. excludes flat disks, items made of felt material and items having joints. for round metal and plastic items with an aperture and a solid rectangular cross section, see washer, flat; shim; bearing, washer, thrust; and spacer ring. excludes disk, valve; seal, nonmetallic angle; seal, nonmetallic channel; seal, nonmetallic special shaped section; shielding gasket, electronic; and ring, sealing jar.