Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 1770539 specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
solid single or composition
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
3.470in. and 3.503in. ⁓3-33/64"
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
2.720in. and 2.780in.
A measurement of the line segment extending from the center of a circle or sphere to the curve of an inside corner.
0.090in. and 0.150in.
0.090in. and 0.150in.
A measurement taken at right angles to the length of an aperture,in distinction from thickness.
1.500in.
A measurement of the longest dimension of an aperture,in distinction from width.
3.000in.
A measurement of the smallest dimension of a cross section,in distinction from length or width.
0.063in.
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
45.0 shore durometer a and 55.0 shore durometer a
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
four slots 0.050 in. lg. by 0.242 in. wide spaced 0.120 in. from out side edge along the length and width color gray
The chemical compound or mechanical mixture properties of which the item is fabricated.
rubber chloroprene class cr
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
astm D2000, 2BC507A1C2F2 assn std single material response
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
NON-Circular
Answers.
Non-circular
Rubber chloroprene class cr
2.720 inches minimum and 2.780 inches maximum
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-00-990-3698 GASKET
non-circular four slots 0.050 in. lg. by 0.242 in. wide spaced 0.120 in. from out side edge along the length 2.720" overall width 3.470" overall length
- NIIN
- 009903698
- NIIN Date
- 11/18/66
- Schedule B
- Name Code
- 04522
- FIIG
- A032A0
- QUP
- Historical Price
- $5.20 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
Availability for 1770539 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Gaskets, (machinery and parts),(less than 35 feet)
- NMFC (national motor freight code)
- 194120 WASHERS/GASKETS/PCKG DVCS NOI
- UFC (universal freight code)
- 95100
Similar by Design Other gaskets with similar characteristics
Nothing similar to this part number was found in our inventory
1770539 / GasketWhat is the formal definition of this item?
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. it may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. it may be made to any predetermined dimension and shape. excludes flat disks, items made of felt material and items having joints. for round metal and plastic items with an aperture and a solid rectangular cross section, see washer, flat; shim; bearing, washer, thrust; and spacer ring. excludes disk, valve; seal, nonmetallic angle; seal, nonmetallic channel; seal, nonmetallic special shaped section; shielding gasket, electronic; and ring, sealing jar.
