1508M13-28

1508M1328 Gasket

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. 1508M13-28 specification

Cross-sectional Shape Style
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.

metal and synthetic rubber

Hole Diameter
The length of a straight line which passes through the center of a hole,and terminates at the circumference.

0.261in. and 0.276in. ⁓9/32"

Overall Length
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

2.632in. and 2.672in. ⁓2-43/64"

Overall Width
An overall measurement taken at right angles to the length of an item,in distinction from thickness.

2.632in. and 2.672in.

Aperture Diameter
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.

1.612in. and 1.632in.

Outside Corner Radius

0.280in. and 0.350in.

Cross-sectional Thickness
A measurement of the smallest dimension of a cross section,in distinction from length or width.

0.157in.

Gage Ring Thickness

0.100in. and 0.110in.

Bolt Hole Quantity
The number of bolt holes provided on the item.

4

End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.

turbo fan engine, F110GE100 for F-16 c&d aircraft

Elongation Percentage
The percentage the item will stretch.

120

Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.

75.0 shore durometer a

Criticality Code Justification
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.

spcl

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

seals bonded to each side of CEN-Ter hole; made from synthetic rubber per MIL-R-83485, type 1

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 302 retainer or steel comp 304 retainer

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 5513 assn std single material response retainer or ams 5515 assn std single material response retainer

Special Test Features
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.

no leaks permitted during 16000 pressure cycles between 100 psi to 1400 psi using JP-4 with elastomer at 200 deg f +/- 25 deg f and a 0.010 +/- 0.0005 gap between the flange and retainer

Style Designator
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

NON-Circular

Answers.

What quantity is this sold in?

1EA

What is the style?

Non-circular

What material is the gasket made of ?

Steel comp 302 retainer or steel comp 304 retainer

What is the bolt hole quantity?

4

What is the overall width?

2.632 inches minimum and 2.672 inches maximum

What is the inside hole diameter?

0.261 inches minimum and 0.276 inches maximum

What is the NSN for 1508M13-28?

5330-01-348-6170

What's the federal classification of 1508M13-28?

FSC 5330 ⁓ Packing and gasket materials

Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.

Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.

NSN 5330-01-348-6170 GASKET

Used on turbo fan engine,f110ge100 for f-16 c&d aircraft. non-circular seals bonded to each side of cen-ter hole; made from synthetic rubber per mil-r-83485, type 1 4 bolt hole quantity 2.632" overall width 2.632" overall length 0.261" hole diameter

NIIN
013486170
NIIN Date
11/14/91
Schedule B
 
Name Code
04522
FIIG
A032A0
Item Weight
0.100lbs
Item Dimensions
--
QUP
Historical Price
$97.15 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1. 908119-8 Cage 83259
2. 1508M13P128 Cage 07482
3. 1508M13P128 Cage 95272
4. 1508M13 Cage 07482

Major End Users Countries and entities

  • - Department of The Navy 
  • - Department of The Air Force 
  • - Poland 
  • - Singapore 
  • - Republic of Korea 
  • - Greece 

Availability for 1508M13-28 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
70.0 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater 
Commodity (for shipments via water)
Gaskets, (machinery and parts),(less than 35 feet) 
NMFC (national motor freight code)
194050 GASKETS/RINGS PLUMBING FIXTURES 
UFC (universal freight code)
78100 

Similar by Design Other gaskets with similar characteristics

Nothing similar to this part number was found in our inventory

1508M13-28 / GasketWhat is the formal definition of this item?

A deformable material which prevents the passage of matter through the joint formed when two faces are joined. it may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. it may be made to any predetermined dimension and shape. excludes flat disks, items made of felt material and items having joints. for round metal and plastic items with an aperture and a solid rectangular cross section, see washer, flat; shim; bearing, washer, thrust; and spacer ring. excludes disk, valve; seal, nonmetallic angle; seal, nonmetallic channel; seal, nonmetallic special shaped section; shielding gasket, electronic; and ring, sealing jar.