Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 1092B309 specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
solid single or composition
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
4.500in. ⁓4-1/2"
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.
-20.0 deg fahrenheit and 212.0 deg fahrenheit
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
2.560in.
A measurement of the line segment extending from the center of a circle or sphere to the curve of an inside corner.
0.190in.
A measurement taken at right angles to the length of an aperture,in distinction from thickness.
2.250in.
A measurement of the longest dimension of an aperture,in distinction from width.
4.120in.
0.160in.
0.190in.
A measurement of the smallest dimension of a cross section,in distinction from length or width.
0.016in.
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
45.0 shore durometer a and 55.0 shore durometer a
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.
feat
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
tolerance & fit restriction
The chemical compound or mechanical mixture properties of which the item is fabricated.
rubber chloroprene class cr
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-G-1149, ty 1, cl 1 mil spec single material response
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.
special quality control testing
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
NON-Circular
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-P-23199 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
Answers.
1EA
Non-circular
Rubber chloroprene class cr
2.560 inches
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
NSN 5330-01-322-2587 GASKET
non-circular tolerance & fit restriction 2.560" overall width 4.500" overall length
- NIIN
- 013222587
- NIIN Date
- 06/30/90
- Schedule B
- Name Code
- 04522
- FIIG
- A032A0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $25.50 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | LL-HQ6-6202 | Cage 14153 |
Major End Users Countries and entities
- - Department of The Navy
Availability for 1092B309 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Gaskets, (machinery and parts),(less than 35 feet)
- NMFC (national motor freight code)
- 194050 GASKETS/RINGS PLUMBING FIXTURES
- UFC (universal freight code)
- 78100
Similar by Design Other gaskets with similar characteristics
Nothing similar to this part number was found in our inventory
1092B309 / GasketWhat is the formal definition of this item?
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. it may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. it may be made to any predetermined dimension and shape. excludes flat disks, items made of felt material and items having joints. for round metal and plastic items with an aperture and a solid rectangular cross section, see washer, flat; shim; bearing, washer, thrust; and spacer ring. excludes disk, valve; seal, nonmetallic angle; seal, nonmetallic channel; seal, nonmetallic special shaped section; shielding gasket, electronic; and ring, sealing jar.
