Serving our customers with quality and safety first.
not rated
24.000in.
0.125in. ⁓1/8"
24.000in.
rubber, synthetic
steam and water resistant
asbestos, HH-P-46
asbestos chrysotile and rubber natural or rubber synthetic
HH-P-46 mil spec single material response
1SF
Asbestos chrysotile and rubber natural or rubber synthetic
Schedule B number: 6812930000
nmfc 149265
Compressed asbestos fiber jointing, in sheets or rolls
FSC 5330 ⁓ Packing and gasket materials
Note-this fsc includes only seals and gaskets designed for standard use. seals, gaskets and packing are made from materials specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals, liquids, and used to fill a cavity and create a tight seal. similar materials used to make seals, gaskets, and packing are available in bulk form, refer to fsg 93, fsg 80, and fsg 83.
Excluding o-rings (fsc 5331); bulk material items, such as; rubber, cork, and asbestos sheets and strips (fsg 93); liquid gasket materials (rtv, permatex, etc.) (fsg 80); rfi and emi seals and gaskets (fsc 5999), and all seal retainers.
1. | HH-P-46 | Cage 81348 |
2. | 7874-010R04 PIECE 27 | Cage 96169 |
Nothing similar to this part number was found in our inventory
A compressed sheet consisting of asbestos fiber uniformly mixed with a binder. it may be flat or in roll form. it is usually pliable and normally used as a gasket material. sheets are limited to widths greater than 6 inches (152.4 mm). excludes insulation blanket, thermal; insulation block, thermal; insulation board, thermal; paper, asbestos; and items designed for clutch and/or brake applications.