Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. PB24125-2 specification
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
1.729in. and 1.739in. ⁓1-3/4"
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
1.979in. and 1.989in.
The distance measured in a straight line from the bottom to the top of an item.
0.068in. and 0.088in.
A measurement of the smallest dimension of the material,in distinction from length or width.
0.012in.
The chemical compound or mechanical mixture properties of which the item is fabricated.
beryllium
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-C-533 fed spec single material response
Answers.
Beryllium
0.012 inches
1.979 inches minimum and 1.989 inches maximum
1.729 inches minimum and 1.739 inches maximum
Schedule B number: 8112190000
nmfc 194120
Other beryllium, wrought, and articles, thereof nesoi
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
NSN 5310-00-595-7522 WASHER,SPRING TENSION
0.012" material thickness 1.979" outside diameter 1.729" hole diameter
- NIIN
- 005957522
- NIIN Date
- 01/01/63
- Schedule B
- 8112190000
- Name Code
- 15938
- FIIG
- A022B0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Portugal
- - Greece
Availability for PB24125-2 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- 77.5
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 194120 WASHERS/GASKETS/PCKG DVCS NOI
- UFC (universal freight code)
- 95100
Similar by Design Other washers with similar characteristics
Nothing similar to this part number was found in our inventory
PB24125-2 / Washer,spring tensionWhat is the formal definition of this item?
A bent spring metal washer with a centrally located hole. it is designed to exert pressure axially when assembled in place.
