Serving our customers with quality and safety first.
3.2 mm and 3.5 mm
5.625 mm and 6.375 mm
0.65 mm and 1.30 mm
0.35 mm and 0.45 mm
82.0 rockwell superficial 15-n and 85.5 rockwell superficial 15-n
steel comp 1050 or steel comp 1055 or steel comp 1060 or steel comp 1064 or steel comp 1065 or steel comp 1070 or steel comp 1074 or steel comp 1080 or steel comp 1085 or steel comp 1086 or steel comp 1095
astm A682 assn std all material responses
cadmium and chromate
QQ-P-416, ty 2, cl 2 fed spec single treatment response or MIL-C-81562, ty 2, cl 2 mil spec single treatment response
spring tension
Spring tension
Steel comp 1050 or steel comp 1055 or steel comp 1060 or steel comp 1064 or steel comp 1065 or steel comp 1070 or steel comp 1074 or steel comp 1080 or steel comp 1085 or steel comp 1086 or steel comp 1095
0.35 millimeters minimum and 0.45 millimeters maximum
5.625 millimeters minimum and 6.375 millimeters maximum
3.2 millimeters minimum and 3.5 millimeters maximum
Schedule B number: 7318210000
nmfc 194160
Spring washers and other lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
spring tension cadmium surface treated 0.35mm material thickness 5.625mm outside diameter 3.2mm hole diameter
1. | DOD-W-63474/1 | Cage 81349 |
Nothing similar to this part number was found in our inventory
A bent spring metal washer with a centrally located hole. it is designed to exert pressure axially when assembled in place.